JZC4 Series Contactor Type Relay

Applicable range
JZC4 series contactor type relay is used in the control circuit with AC 50Hz (or 60Hz),voltage up to 380V and AC voltage up to 220V TO control various kinds of electromagnetic loop,enhance the signal and transmit the signal.
The product conforms to the GB14048.4, IEC60947-4-1 standards.
Structural feature
1.Moving mechanism is moving directly type ,the contact is double break point
2.Combination function: all surfaces can be assembled with other accessories
except the installation surface
3.All sides can be assembled with auxiliary contact group F8 (LA8);
4.It can be installed auxiliary contact group (F4) at the top or air delay HSK4-2/3 (LA2/3-D);
5.Loop connection can be installed delay or magnifying function module
6.Protection type ,protection degree IP10
7.Contact is forcible attrition structure , movable and immovable contact form the reticulation and improve the reliability and also can clean itself .
Working condition and installation condition
1.Ambient air temperature +5~40
2.Installation altitude: not beyond 2000m
3. Air relative humidity: when the highest temperature is +40,the humidity is not
beyond 50%when the temperature is low, the humidity can be a little high.The
miniature average temperature can not be beyond +25 in the maximum humid month .
4.The maximum average humidity can not beyond 90%, considering the dew producing on the products with the change of the temperature.
5.Pollution degree: 3 degree
6.Installation kinds:
7.It can be installed by the bolts and can also be installed by 35mm standard rail.